97
ATL P1000 Series User’s Guide
Appendix B Installing the Slide Assembly in the Rack
Appendix B
Installing the Slide Assembly in
the Rack
B
This appendix provides instructions for installing the slide assembly in
the rack. This procedure consists of the following steps:
•
verifying that the rack meets the necessary requirements
•
determining the mounting position of the slide assembly within
the rack
•
mounting the slide assembly in the rack
•
adjusting the slide assembly to allow for required clearances
Warning: Use safe lifting practices when moving the slide assembly
or the library. The slide assembly weighs about 25 lbs
(11.25 kg) and its size and construction make it awkward to
handle. The library weighs 89 lbs (40 kg); it must be lifted
with assistance. Failure to follow these guidelines may
result in equipment damage or personal injury.
Warning: When installing the library and other devices in the rack,
determine the weight of each device and position the
heaviest devices lower in the rack. If the library is the first
device to be installed, place it near the bottom of the rack.
Summary of Contents for P1000 Series
