Quantum P1000 Series, User Manual, Page: 65 / 132

Chapter 3 Basic Operations
Changing the GUI Security Level
ATL P1000 Series User’s Guide 49
Changing the GUI Security Level
3
Table 7 describes the five levels of security for the P1000 library GUI.
The security level indicator at the lower left corner of the GUI indicates
the current security level.
Table 7 GUI Security
Levels
Securing the GUI
3
The default security level is User. This security level provides access to
the Overview and Tapes screens and the functions on the vertical bar.
It does not provide access to the Operator and Service screens.
Note: This procedure is especially useful for changing from the Operator or
Service security levels to the User level after executing an Operator or
Service level command.
Security Level Indicator Description
Service (S) This security level provides access to all
GUI screens (Overview, Tapes, Operator,
and Service) and all functions on the
vertical bar.
Operator (O) This security level provides access to the
Overview, Tapes, and Operator screens, and
all functions on the vertical bar.
User (U) This security level provides access to the
Overview and Tapes screens, and all
functions on the vertical bar.
Import Only (I) This security level provides access to the
Overview and Tapes screens, and the Load
Port button on the vertical bar. This security
level prevents access to the Stop or Standby
buttons on the vertical bar.
Locked (L) This security level provides access to the
Overview and Tapes screens only. This
security level prevents access to any
functions on the vertical bar.
S
O
U
I
L