Quantum P1000 Series, User Manual, Page: 26 / 132

Chapter 1 Library Description
Operator-Accessible Components
10 ATL P1000 Series User’s Guide
The front doors lock to prevent unauthorized access to the P1000. To
unlock and open the doors:
Procedure
1
If the library is on-line, press the Standby button on the GUI.
The system status indicator above the Standby button changes to
indicate that the library is in Standby mode.
2
Use the key to unlock the load pack door.
3
Press the Load Pack button on the GUI.
This prepares the library for load pack removal. Always press the
Load Pack button before opening the front door to access the load
pack.
4
Open the left door and then open the right door.
Load Port
1
The load port enables you to insert a single tape cartridge into the
P1000. To open the load port, press the Load Port button on the GUI.
Load and Bulk Packs
1
The load and bulk packs are eight-cartridge removable magazines that
attach to the front storage bin frame (see figure 7). Use these packs to
add or remove multiple tape cartridges.
The load pack can be configured as an additional load port.
Figure 7 Load and Bulk
Packs
To install or remove load or bulk packs, see chapters 2 and 3.
Load pack
Bulk pack