Quantum P1000 Series, User Manual

Page: 68 / 132

Chapter 3 Basic Operations
Performing Manual Operations
52 ATL P1000 Series User’s Guide
Placing the Library
Off-line
3
To place the library off-line:
Note: You must have Operator level access privileges or higher to perform
this procedure (see “Changing the GUI Security Level” on page 49).
Procedure
1
With the library turned on and the GUI indicating “System
On-line,” press the Standby button on the GUI.
2
Verify that the GUI displays “System Off-line.”
Turning Off the Library
3
To turn off the library:
Procedure
1
Place the library off-line (see the previous section, “Placing the
Library Off-line”).
The library completes the current command and then stops.
2
Verify that the GUI displays “System Off-line.”
3
Verify that the gripper is empty by checking the Overview screen.
4
If there is a tape cartridge in the gripper, execute a Move command
to place the cartridge in an empty bin or drive (see “Moving a
Cartridge” on page 64).
5
At the front panel, set the power switch off.
Caution: Always leave the library power off for at least 15 seconds
before turning it on again.
Inserting Tape
Cartridges
3
This section explains how to insert tape cartridges.
Note: You must have Import Only level access privileges or higher to
perform this procedure (see “Changing the GUI Security Level” on
page 49).
Caution:
Do not use CompacTape I™, CompacTape II™, or
CompacTape IIIXT™ tape cartridges in this library.