![background image](http://html1.mh-extra.com/html/quantum/p1000-series/p1000-series_user-manual_3845743115.webp)
Appendix B Installing the Slide Assembly in the Rack
Determining the Mounting Position
ATL P1000 Series User’s Guide
99
Determining the Mounting Position
B
To determine the mounting position of the slide assembly within the
rack:
Procedure
1
Locate the desired mounting position for the library (see figure 54).
The library and slide assembly require at least 21 in. (54 cm or 12
rack units) of vertical clearance. To ensure stability, mount the
library low in the rack.
Figure 54 Positioning the
Slide Assembly
As indicated in figure 54, the bottom edge of each slide assembly
bracket must line up with the end of a rack unit.
2
If the rack retma rail holes are not threaded, attach the appropriate
threaded clips to the holes that correspond to:
•
the mounting bracket tabs (front and back)
•
the locking bracket tabs (front only)
•
the temporary support screws (front and back)
Rack retma rail
0.5 in. (12.7 mm)
0.625 in. (16 mm)
Slide assembly
Locking bracket
Insert temporary support screw here
Mounting bracket
1 rack unit
21 in. (54 cm
or 12 rack units)
minimum vertical
clearance required
0.5 in. (12.7 mm)
0.625 in. (16 mm)
0.625 in. (16 mm)
0.5 in. (12.7 mm)
1 rack unit (1.75 in. / 4.45 cm)
Summary of Contents for P1000 Series
