![background image](http://html1.mh-extra.com/html/quantum/p1000-series/p1000-series_user-manual_3845743037.webp)
Chapter 2 Installing the P1000 Library
Unpacking the P1000
ATL P1000 Series User’s Guide
21
Installing the Slide
Assembly in the Rack
2
If you are installing a rack-mount library, install the slide assembly in
the rack before proceeding to the next section, “Removing the Library
from the Pallet.” See appendix B for slide assembly installation
instructions.
Removing the Library
from the Pallet
2
This section provides separate procedures for the stand-alone and
rack-mount libraries:
•
To remove a stand-alone library from the pallet, see the following
section, “Removing a Stand-alone Library from the Pallet.”
•
To remove a rack-mount library from the pallet, see “Removing a
Rack-mount Library from the Pallet” on page 23.
Warning: Two people should perform steps that involve lifting or
guiding the library. Use safe practices when lifting or
guiding the library and handling the slide assembly or the
ramp.
Removing a Stand-alone Library from the Pallet
2
To remove a stand-alone library from the pallet:
Procedure
1
Remove the plastic bag enclosing the P1000:
a
Cut along the front seam of the plastic bag.
b
Continue to cut all the way to the back of the library.
c
Fold the bag out of the way.
2
Remove the foam supports from between the library and the pallet
(see figure 15).
Summary of Contents for P1000 Series
