Chapter 2 Installing the P1000 Library
Unpacking the P1000
ATL P1000 Series User’s Guide
25
Figure 18 Placing the
Library on the Slide
Assembly Tray
Procedure (continued)
5
Secure the library to the slide tray, using six screws from the
accessories kit (see figure 18).
6
Verify that, when the slide assembly is fully extended, there is
adequate clearance around the library to access the back panel and
remove the library enclosure.
7
Press on the inner channel locks to release them (see figure 18) and
then push the slide assembly all the way into the rack.
8
To prevent the library from sliding out of the rack during
operation, secure the locking brackets to the retma rails (see
figure 19 on page 26).
Inner channel lock
Screws
Summary of Contents for P1000 Series
