Chapter 2 Installing the P1000 Library
Configuring and Testing the Library
40
ATL P1000 Series User’s Guide
Configuring and Testing the Library
2
When you finish installing the library, make any desired changes to the
library configuration and then calibrate the library and test its
functionality.
Table 3 shows a sample library configuration.
Table 3 Sample Library
Configuration
To view and make changes to the configuration or to calibrate the
library, see chapter 4. To test the library, see chapter 5.
Note: You must have either Operator or Service access privileges to access
the options described in chapter 4 and Service access privileges to
access the options described in chapter 5.
Item
Sample Default
Condition
Model number
6220000
Number of bins (fixed storage and load pack)
30
Number of drives
4
Library SCSI ID number
0
Drive 0 SCSI ID number
2
Drive 1 SCSI ID number
3
Drive 2 SCSI ID number
4
Drive 3 SCSI ID number
5
Library power-up state
On-line
Automatic drive cleaning function
Disabled
Retry move command
Enabled
Auto load from load port
Disabled
Auto inventory at power up
Enabled
No bar code scan
Disabled
4/52 identity
Disabled
Summary of Contents for P1000 Series
