Chapter 2 Installing the P1000 Library
Unpacking the P1000
ATL P1000 Series User’s Guide
27
Removing the Internal
Packing Materials
2
This section explains how to remove the internal packing materials
that protect the library during shipping and installation.
Caution:
Before removing the internal packing materials, verify that
the library is at its final installation site. Moving the library
without these materials in place may damage the library.
Caution:
Take precautions to prevent electrostatic discharge
whenever you remove the library enclosure or open the
library doors.
Opening the Doors
2
To open the library doors:
Procedure
1
Locate the key in the accessories kit and unlock the front door of
the library.
2
Open the left door first, then open the right door.
Removing the Load and Bulk Packs
2
To remove the load and bulk packs (see figure 20):
Procedure
1
Grip the load pack handles and squeeze them together.
This releases the latches securing the load pack.
2
Still holding the load pack handles, pull the load pack forward and
out of the library.
3
Repeat steps 1 and 2 to remove the bulk pack.
Summary of Contents for P1000 Series
