PRONAR RC2100, Translation Of The Original Copy Of The Manual

Page: 46 / 125

Pronar RC2100 SECTION 3
3.4
reflective lights are attached to the bottom side of the ramps – rear lamp assembly (4) and
slow-moving vehicle warning sign (3). When travelling, the ramps must be folded and
secured using provided interlocks.
FIG. 3.2 Front view
(1) floor planks, (2) fixing lugs, (3) front wall, (4) spare wheel, (5) wedge, (6) floor extension
bracket, (7) holder for spare planks, (8) under-run protective device, (9) winch
The load platform floor is made of profiled planks (1) Figure (3.2) with a thickness of 45 mm.
Load placed on the platform is secured with belts, ropes or chains, which are attached to
fixing lugs (2) located along the whole platform, on both sides of the trailer. The fixing lugs
are marked with information decals (9) – table (2.1). On the front side, the load platform is
limited by wall (3) to which spare wheels (4) (optional equipment) and chocks (5) are
attached. Optional winch (9) with hydraulic drive system is also installed behind the front wall.
On the left side of the frame, between under-run protective device (8) and floor surface, there
is holder (7) (optional equipment) for storing floor planks which are used for widening the load