PRONAR RC2100, Translation Of The Original Copy Of The Manual

Page: 65 / 125

SECTION 4 Pronar RC2100
4.7
Disconnect electric lead.
Disconnect pneumatic system lines.
Disconnect pneumatic line marked red.
Disconnect pneumatic line marked yellow.
Protect ends of hydraulic and pneumatic lines with covers. Place line terminals
in appropriate sockets in the bracket located on the trailer drawbar.
Disconnect drawbar from the tractor's hitch and move the tractor forward.
Place chocks under trailer wheel.
Wheel chocks shall be so placed that one of them is in front of the
wheel and the second is behind it.
DANGER
Exercise caution when disconnecting trailer from the tractor. Ensure good visibility.
Unless it is necessary, do not go between tractor and trailer.
Before disconnecting conduits and drawbar eye, close tractor cab and secure it against
access by unauthorised persons.
4.3 TRAILER SUPPORT OPERATION
Setting the support to driving position
Immobilise tractor and trailer with parking brake.
Open valve (5).
Shift valve lever in the direction of „O” – decal (6).
Operate selective control valve in the tractor in order to raise the support foot.
The tractor must be connected with the trailer before the support foot
is raised.
Hydraulic line marked with decal (7) – figure (4.1) must be connected
to the tractor hydraulic socket. The trailer must be hitched to the
tractor.