PRONAR RC2100, Translation Of The Original Copy Of The Manual

Page: 71 / 125

SECTION 4 Pronar RC2100
4.13
Take out cotter pins (2) securing extension brackets (1).
In order to prevent loss of cotter pins, insert them again into the
openings of locking pins (4), after unfolding the brackets.
Take out additional planks from the holder for spare planks and arrange them
evenly on extension brackets.
Place the load on the trailer platform.
Fold the ramps using hydraulic system selective control valve.
Install the ramps' interlocks, tighten the interlocks using bolts.
Secure the load.
IMPORTANT!
Lower the ramps until they fully rest on the ground. Otherwise, when a machine is driven
onto the load platform, the trailer will have a tendency to raise the drawbar, which may
cause damage to the tractor hitch or drawbar.
Oversize load may not fully load the floor extension elements. Wheels, brackets, supports or
other load elements, item (1) Figure (4.3), which carry the machine load, must be arranged in
such a manner as to ensure that at least a half of the element is supported on a fixed section
of the load platform (planks (5) and extreme longitudinal member of the low chassis trailer
(2)).
IMPORTANT!
Unfolded ramps must be at the same height. Do not place the ramps in such a manner that
one of the ramps is supported on an obstacle (e.g. stone, curb etc.).