PRONAR RC2100, Translation Of The Original Copy Of The Manual

Page: 76 / 125

Pronar RC2100 SECTION 4
4.18
After finishing work and folding the ramps, check whether the spring catches have
automatically returned to locking position. Otherwise, set the levers to correct position -
position (1) – Figure (4.5).
4.6 OPERATION OF HYDRAULIC WINCH
4.6.1 USE OF HYDRAULIC WINCH
DANGER
Do NOT use out of order hydraulic winch.
Pull the release lever up.
Extend the winch rope along the load platform and attach the winch hook to
load fixing lug.
Press the lever.
Tighten the winch rope preliminarily by means of hydraulic controller, by
winding the rope around the drum.
Check if the hook is correctly attached.
Pull the load onto the trailer platform.
4.6.2 GENERAL PRINCIPLES OF SAFE OPERATION OF THE WINCH
•
Before operating the winch, immobilise tractor and trailer with parking brake. It is
additionally recommended that chocks should be placed under the trailer wheel.
•
Do NOT use additional accessories to extend the winch rope.
•
Do NOT unwind the rope to its full length. At least 5 rope fakes must remain on
the drum.
•
Do NOT go under and over the rope during winch operation.
•
Do NOT stand between the winch and pulled load.
•
Do NOT use the winch if hydraulic system is leaking.