Pronar RC2100
SECTION 2
2.12
•
Do NOT make repairs to drawbar and drawbar eye (by straightening, pad welding
or welding). Damaged drawbar eye or drawbar should be replaced.
•
Regularly check technical condition and mounting of all guards and protective
elements.
•
Water tank should be filled only with clean water. Chemicals or other fluids must
not be stored in the tank. Water stored in the tank is not potable.
2.2
DESCRIPTION OF MINIMAL RISK
Pronar Sp. z o. o. in Narew has made every effort to eliminate the risk of accidents. There is,
however, a certain minimal risk, which could lead to an accident, and this is connected mainly
with the actions described below:
•
using the trailer for purposes other than those for which it is intended,
•
being between the tractor and the trailer while the engine is working and when the
machine is being attached or hitched to second trailer
•
being on the machine while the engine is working,
•
not maintaining safe distance during loading or unloading of trailer,
•
operation of the trailer by persons under the influence of alcohol,
•
making modifications to the machine without the consent of the Manufacturer,
•
cleaning, maintenance and technical checks of the trailer,
•
operating the trailer with the safety guards removed or faulty,
•
presence of persons or animals in areas invisible from the driver's position.
The minimal risk may be kept to a minimum by following the recommendations below:
•
prudent and unhurried operation of the machine,
•
sensible application of the remarks and recommendations contained in the
Operator's Manual,
•
maintaining safe distance from forbidden or dangerous places during unloading,
loading and hitching trailer,
•
carrying out repair and maintenance work in line with operating safety rules,
Summary of Contents for RC2100
