PRONAR RC2100 Translation Of The Original Copy Of The Manual Download Page 106

Page: 106 / 125

Pronar RC2100

SECTION 5

5.24

•

Checking technical condition of hydraulic connections.

DANGER

Do NOT use out of order hydraulic system.

Do NOT use the trailer with out of order hydraulic brake system.

5.4.2 CHECKING HYDRAULIC SYSTEM TIGHTNESS

REQUIRED SERVICE ACTIONS

Hitch trailer to tractor.

Connect all hydraulic system lines according to service instructions.

Clean connectors and ram cylinders.

Activate several times ramp hydraulic cylinders and support hydraulic cylinder.

Press tractor brake pedal several times

Only if the trailer is equipped with hydraulic brake system.

Check tightness of hydraulic system, inspect cylinders and hydraulic lines.

In the event of confirmation of oil on hydraulic ram cylinder bodies ascertain origin of leak.

Inspect hydraulic seals when ram cylinder is completely extended. Minimum leaks are

permissible with symptoms of "sweating", however in the event of noticing leaks in the form

of "droplets" stop using the trailer until faults are remedied. If unreliability is evident in brake

cylinders do NOT use trailer with damaged system until faults are remedied.

Checking tightness:

•

After a week of use

•

every 12 months of use.

5.4.3 CHECKING TECHNICAL CONDITION OF HYDRAULIC CONNECTIONS AND

SOCKETS.

Hydraulic connections must be technically reliable and kept clean. Each time before

connecting, check if sockets in tractor are maintained in good working condition. Tractor and

Summary of Contents for RC2100






























































































































Search results

Summary of Contents for RC2100

Reviews:

Related manuals for RC2100

Brands by name

Popular brands

PRONAR RC2100, Translation Of The Original Copy Of The Manual

Search results

Summary of Contents for RC2100

Reviews:

Related manuals for RC2100

Brands by name

Popular brands