PRONAR RC2100, Translation Of The Original Copy Of The Manual

Page: 81 / 125

SECTION 4 Pronar RC2100
4.23
•
During reversing one should use the assistance of another person, who gives
directions standing clear of the danger zone.
4.9 PROPER USE AND MAINTENANCE OF TYRES
•
When working on the tyres, chocks or other objects without sharp edges should
be placed under the wheels of the trailer to prevent it from rolling. Wheels can be
taken off the trailer axle only when the trailer is not loaded.
•
Repair work on the wheels or tyres should be carried out by persons trained and
entitled to do so. This work should be carried out using appropriate tools.
•
After removing a wheel, always check how firmly the nuts are screwed in.
Inspection should take place each time after first use, after first journey with a
load and then every 6 months. In the event of intensive work, check the nut
tightening at least every 100 km.
•
During wheel dismounting, memorize the sequence of wheel and spacer ring
dismounting. The smaller ring is mounted on the wheel axle drum side. The larger
ring is mounted on the external side.
•
Regularly check and maintain correct pressure in tyres according to Operator's
Manual (especially if trailer is not used for a longer period of time).
•
Pressure and tyres should be also checked after the whole day of intensive work.
Please note that higher temperatures could raise tyre pressure by as much as 1
bar. At high temperatures and pressure, reduce load or speed.
•
Do not release air from warm tyres to adjust the pressure or the tyres will be
underinflated when temperatures return to normal.
•
Protect tyre valves using suitable caps to avoid soiling.
•
Do not exceed the trailer's maximum design speed.
•
Avoid potholes, sudden manoeuvres or high speeds when turning.