PRONAR RC2100, Translation Of The Original Copy Of The Manual

Page: 115 / 125

SECTION 5 Pronar RC2100
5.33
Parts, which should be lubricated with machine oil, should be wiped with dry cleaning cloth
and then a small quantity of oil should be applied do surfaces (with oil can or brush). Wipe off
excess oil.
Change of grease in hub bearings should be entrusted to specialised service points,
equipped with the appropriate tools. According to the recommendations of the axle
Manufacturer, dismantle the entire hub, remove the bearing and individual sealing rings. After
careful washing and inspection mount lubricated elements. If necessary, bearing and seals
should be replaced with new parts. Lubrication of axle bearings shall be performed at least
once in 2 years or every 50 000 km. In the event of intensive use, lubrication should be
performed more frequently.
Empty grease or oil containers should be disposed of according to the recommendations of
the lubricant Manufacturer.
During trailer use the user is obliged to observe lubrication instructions according to
attached lubrication schedule.
5.8 CONSUMABLES
5.8.1 HYDRAULIC OIL
Always adhere to the principle that the oil in the trailer hydraulic system and in the tractor
hydraulic system are of the same type. In the event of application of different types of oil
make certain that both hydraulic substances may be mixed together. Application of different
oil types may cause damage to trailer or tractor. In a new machine, the hydraulic system is
filled with L HL32 Lotos hydraulic oil.
In the event of necessity of changing hydraulic oil for another oil, check the recommendations
of the oil Manufacturer very carefully. If it is recommended to flush the system with the
appropriate preparation, then comply with these recommendations. Attention should be
given, so that chemical substances used for this purpose do not damage the materials of the
hydraulic system. During normal trailer use change of hydraulic oil is not necessary, but if
required, this operation should be entrusted to a specialist service point.