PRONAR RC2100, Translation Of The Original Copy Of The Manual

Page: 121 / 125

SECTION 5 Pronar RC2100
5.39
5.12 TROUBLESHOOTING
TAB. 5.7 Troubleshooting
FAULT CAUSE REMEDY
Brake system pneumatic
conduits not connected Connect brake conduits (applies
to pneumatic systems)
Applied parking brake Release parking brake.
Damaged pneumatic
system connection conduits
Replace.
Leaking connections
Tighten, replace washers or seal
set, replace conduits.
Problem with moving off
Damage control valve or
brake force regulator
Check valve, repair or replace.
Excessive slack in bearings
Check slack and regulate if
needed
Damaged bearing Replace bearing
Noise in axle hubs
Damaged hub parts Replace
Insufficient pressure in
system
Check pressure on tractor
pressure gauge, wait till
compressor fills tank to required
pressure.
Damaged air compressor in
tractor Repair or replace.
Damaged brake valve in tractor.
Repair or replace.
Leaking system lines or
connections. Check system for
tightness.
Incorrect main or parking
brake adjustment
Regulate setting of expander arms
Poor reliability of braking
system.
Excessive heating of axle
hubs
Worn brake linings Change brake shoes
Incorrect hydraulic
system operation
Improper hydraulic oil
viscosity Check oil quality, make sure that
the oil in both machines is of the
same type. If necessary change