PRONAR RC2100, Translation Of The Original Copy Of The Manual

Page: 34 / 125

Pronar RC2100 SECTION 2
2.10
2.1.7 MAINTENANCE
•
During the warranty period, any repairs may only be carried out by Warranty
Service authorised by the manufacturer. After the expiry of the warranty period it
is recommended that possible repairs to the trailer be performed by specialised
workshops.
•
In the event of any fault or damage whatsoever, do not use the trailer until the
fault has been fixed.
•
During work use the proper, close-fitting protective clothing, gloves, protective
goggles and appropriate tools.
•
Any modification to the trailer frees the manufacturer from any responsibility for
damage or detriment to health, which may arise as a result.
•
The trailer can only be stood on when it is absolutely motionless and the tractor
engine is switched off. Tractor and trailer should be secured using parking brake
and in addition chocks should be placed beneath trailer wheel. Ensure that
unauthorised persons do not have access to the tractor cab.
•
Service inspections of the trailer should be carried out according to the frequency
specified in this Operator's Manual.
•
Regularly check the condition of nut and bolt connections, in particular
connections of drawbar eye with drawbar and wheel nuts.
•
Before beginning repair works on hydraulic or pneumatic systems reduce oil or air
pressure completely.
•
Servicing and repair work should be carried out in line with the general principles
of workplace health and safety. In the event of injury, the wound must be
immediately cleaned and disinfected. In the event of more serious injuries, seek a
doctor's advice.
•
Repair, maintenance and cleaning work should be carried out with the tractor's
engine switched off and the ignition key removed. Tractor and trailer should be
secured using parking brake and in addition chocks should be placed beneath
trailer wheel. Ensure that unauthorised persons do not have access to the tractor
cab.