PRONAR RC2100, Translation Of The Original Copy Of The Manual

Page: 67 / 125

SECTION 4 Pronar RC2100
4.9
DANGER
While placing the support in driving position, exercise caution and do not place fingers
between the support mounting socket and the support. Danger of severing or crushing.
IMPORTANT!
Do NOT move off or drive with the support raised only by means of the hydraulic
cylinder. The support must be set to driving position.
Do NOT travel with the trailer if the support securing elements are damaged or lost –
safety pin (3) and R-clip (4).
Setting the support to rest position
Immobilise tractor and trailer with parking brake.
Remove R-clip (4) from safety pin (3) – Figure (4.1).
Turn the support to position (1) – parking position.
Insert safety pin (3) to socket (A) and secure it with R-clip (4).
Set cut off valve (5) to „O” position.
Operate selective control valve in the tractor in order to lower the support foot.
Drawbar hitching eye should be slightly raised with regard to the
tractor hitch in order to facilitate unhitching the trailer.
Set valve (5) to „Z” position.
DANGER
Danger of crushing. Be especially careful when lowering the support – this refers to
bystanders or helpers.