PRONAR RC2100, Translation Of The Original Copy Of The Manual

Page: 28 / 125

Pronar RC2100 SECTION 2
2.4
2.1.3 HYDRAULIC AND PNEUMATIC SYSTEMS
•
When operating, the hydraulic and pneumatic systems are under high pressure.
•
Regularly check the technical condition of the connections and the hydraulic and
pneumatic leads. There must no oil or air leaks.
•
In the event of malfunction of the hydraulic or pneumatic system, do not use the
trailer until the malfunction is corrected.
•
When connecting the hydraulic lines to the tractor, make sure that the tractor
hydraulic system and trailer are not under pressure. If necessary reduce residual
pressure in the system.
•
In the event of injuries being caused by pressurised hydraulic oil, contact a doctor
immediately. Hydraulic oil may find its way under the skin and cause infections. In
the event of contact of oil with eye, rinse with large quantity of water and in the
event of the occurrence of irritation consult a doctor. In the event of contact of oil
with skin wash the area of contact with water and soap. Do NOT apply organic
solvents (petrol, kerosene).
•
Use the hydraulic oil recommended by the Manufacturer.
•
After changing the hydraulic oil, the used oil should be properly disposed of. Used
oil or oil, which has lost its properties, should be stored in original containers or
replacement containers resistant to action of hydrocarbons. Replacement
containers must be clearly marked and appropriately stored.
•
Do not store hydraulic oil in packaging designed for storing food or foodstuffs.
•
Rubber hydraulic lines must be replaced every 4 years regardless of their
technical condition.
•
The ramps can be unfolded only after removing interlocks and releasing locks.
2.1.4 LOADING AND UNLOADING
•
Loading and unloading work should be carried out by someone experienced in
this type of work.