Powertrain
Put on the cutted gear housing and fix it in place with 4 nuts (Figure 2.9.5.5)
Tightening the pinion shaft nut:
The counter torque wrench no. 27 touches the cutted
gear housing and thus fixes the pinion shaft in place.
(Figure 2.9.5.5)
Tightening instructions:
Use tool no. 20 (Figure 2.9.5.4)
Pre-tightening: 30 Nm (22 ft-lb) + 60° angle of rotation
Loosening
Final tightening: 30 Nm (22 ft-lb) + 60° angle of rotation
Tighten the pinion shaft retaining frame with 11 nuts using a crisscross pattern
Porsche spare part No.:
900.817.002.02
Torque:
33 Nm (24.3 ft-lb)
Adhesive:
Loctite 243
The four-point bearing is now centered.
NOTE
2.9.5.4
2.9.5.4
Version: 16.12.2014
95
911 GT3 Cup (991)
MY 2015
