Bodywork
911 GT3 Cup (991)
MY 2015
Together with a second person, remove the front section towards the front of the
vehicle, using the slide hammer with hook if necessary.
The illustration shows the cut off front section from the right.
Adapting carrier frame to new part
Carry out grinding operations using a stainless steel wire brush. Always use special
grinding wheels for grinding aluminum. Use grinding wheels with grain size P80 to
P200. Observe corrosion protection measures.
Sawing template, right
Place the sawing template (1) on the carrier frame. The threaded bolt (2) is used as
fixing. Transfer the saw line (3) on the template’s front end onto the carrier from the
top to the bottom.
4.15.1.7
4.15.1.8
Version: 16.12.2014
208
