Powertrain
2.9.8
Vormontage Schaltwalze
Put adjusting disk (6) Basic Porsche spare part No.: 991.303.297.09 (1.4 mm) on
the shift drum (7)
Insert the grooved ball bearing (5)
Put on the bushing (4) (observe installation position)
Insert the gearshift shaft spacing washer (3)
Insert the grooved ball bearing (2)
Screw on the nut (1) (flattened side in the direction of the grooved ball bearing (2))
and tighten with 60 Nm (44.3 ft-lb) with tool no. 21 (Figure 2.9.8.2) Use Loctite 243.
Moisten the bushing (4) with oil
Insert the shift drum (7)
The bushing (4) and locking sleeve are not screwed onto the gearbox housing until
chapter 2.9.11 Locking sleeve.
2.9.8.2
2.9.8.1
Version: 16.12.2014
104
911 GT3 Cup (991)
MY 2015
