Powertrain
2.10
Overview gearbox settings
Pinion shaft
Preload 4-point-bearing
Set valve: 0.03 – 0.05 mm (Figure 2.9.4.2) via adjustment disk H1
Axial backlash 4-point-bearing
Set valve: 0.02 – 0.05 mm via adjustment disk H2
Pinion shaft position
Offset: 0.00 - 0.02 mm via adjustment disk P1
Cross shaft
Preload 4-point-bearing
Set valve (Pressung): 0.15mm via adjustment disk Q1 (Figure 2.9.20.13)
Backlash pinion/crownwheel “drive”
Set valve: 0.15 – 0.19 mm via adjustment disk P2 (Figure 2.9.18.9)
Backlash pinion/crownwheel “coast”
Set value: 0.10 – 0.14 mm (Figure 2.9.18.9)
Differential
Backlash shift cross shaft/diff
Set valve: 0.10 – 0.20 mm (not adjustable) (Figure 2.9.19.11)
2.9.4.2
2.9.18.9
2.9.19.11
2.9.20.13
Version: 16.12.2014
130
911 GT3 Cup (991)
MY 2015
