Powertrain
2.8.6
Oil supply
Suction tube
Loosen the nut (1) and remove the suction tube (3) (Figure 2.8.6.1)
Injection tube
Loosen the nut (4) and remove the injection tube (2) with the panel puller (M6) (Figure
2.8.6.2)
The injection tube must be removed before taking out
the shift module because the shift module cannot be
pulled out otherwise
Oil pump
Remove the locking ring (1) of the oil pump gearwheel (Figure 2.8.6.3)
Pull off the gearwheel. Keep in mind the insert washers between shaft and gearwheel!
Loosen the fastening nuts of the oil pump and pull off the oil pump
Oil filter element
Remove the locking ring (5)
Remove the closure cap (3) with a panel puller
Remove the oil filter element (2)
NOTE
2.8.6.1
2.8.6.2
2.8.6.3
2.8.6.4
Version: 16.12.2014
65
911 GT3 Cup (991)
MY 2015
