Maintenance
7.1.2
Oil level measurement with display
A digital oil level indicator (7.1.2.1) is optionally available Porsche spare parts
number: 997.641.139.9A. Adapter cable Porsche spare parts number:
991:612:334.8A
The vehicle cable harness is already prepared for this indicator. On the vehicle itself,
the connector for the oil level indicator is provided near the rear side window on the
right side of the vehicle.
According to the digital display, the system filling level
should not exceed 90 %.
7.1.3
Changing the engine oil
Warm up the engine to an oil temperature of 80 °C (176 °F) and then turn off the
engine.
•
When changing the oil filter: Open the oil filler
neck cover & release and pull out the oil filter
housing slightly.
•
Without changing the oil filter: Open the oil
filler neck cover.
This guarantees that the oil flows out without bubbles
and the oil system is sufficiently drained.
•
Remove the drain plugs on the oil tank and on the crankcase (item 2 in
picture 7.1.3.1)
•
Allow the oil to run into a suitable container
•
Use new sealing rings and tighten the drain plugs (50 Nm (37 lb-ft)
tightening torque)
•
Change the oil filter
•
Fill in oil -> see filling quantities
NOTE
WARNING
7.1.3.1
7.1.2.1
Version: 16.12.2014
292
911 GT3 Cup (991)
MY 2015
