Installation & Operation Manual TCC70XS
Page 82
4.3.6
“Keys“: Keys and Lamps, Status and GPIOs
At the front panel, TCC70XS offers an OLED with programmable status segments and four
illuminated keys. At the rear panel, there are four programmable GPIOs and one GPO relay
contact. Basically, the functions of these in
–
and outputs are programmable.
Status 1
Status 2
F1
F2
F3
F4
F1
F3
F2
F4
Status 3
Status 4
Connector REF/GPI
GPIO_1
GPIO_2
GPIO_3
GPIO_4
Connector SERIAL
(depending on
configuration)
GPO_5
The configuration page
Keys
(example shows the browser view):
Press
: A click of any of the buttons F1
–
F4 or GPIO1
–
GPIO4 will execute the programmed
function as long as this function defines the key or GPIO as an input.
Function Keys (and Lamps)
Four keys F1, F2, F3, and F4 can get a function independently from each other. Select a
function from the drop
–
down list. This selects the function of the lamps as well.
This drop
–
down list is identical to the drop
–
down list of GPIO functions.
Please refer to the document “RUB AT/DT/HT/XT + TCC70XS Application: GPIO Functions”
for a description of all available functions. You will find this document at the included CD.
Alternatively, you can download it from:
