Installation & Operation Manual TCC70XS
Page 53
3.2.9
System: Name, Log File, and Ethernet Status
Name
The device can get a name. Enter a text with 20 characters at maximum. Click
button
Save To Module
to store this entry. This name appears wherever TCC70XS
devices can be found within the local network, this helps you to identify this special
device.
Logfile
Get System Logfile
The Ethernet module creates a log file for service purposes.
Click on
/public/system.log
to open this file.
Log Traps
If clicked, traps will produce entries in the log file.
Basically, all integrated modules can send a trap. Please
remember that you can enable/disable traps for each
module via checkboxes at the
System
configuration page.
Log Events
If clicked, events will produce entries in the log file.
Events will be sent mainly in case of errors or warnings.
Remote Log
You can enter an IP address to which every entry can be
sent. The
Syslog
protocol is used. The
Facility
number is
used as follows:
0 message from the Ethernet module
1 traps
2 events
Status Ethernet
Shows the current IP parameters of the Ethernet module.