Installation & Operation Manual TCC70XS
Page 18
Name
Connector
Pin Assignment/Description
LTC IN
XLR3F
IEC 268
–
1
Female
2
1
3
LTC input, balanced
1: GND
2: LTC_IN_A
3: LTC_IN_B
Connections: balanced signals
unbalanced signals
from XLR3M
1
2
3
LTC_IN_A
LTC_IN_B
GND
from Cinch/RCA/BNC
LTC_IN_A
LTC_IN_B
GND
LTC OUT
XLR3M
IEC 268
–
1
Male
1
2
3
LTC output, balanced
1: GND
2: LTC_OUT_A
3: LTC_OUT_B
Connections: balanced use
unbalanced use
to XLR3F
2
1
3
GND
LTC_OUT_B
LTC_OUT_A
to Cinch/RCA/BNC
LTC_OUT_A
GND
LTC_OUT_B
VIDEO IN
BNC
Female
Serial digital video input: SD, HD, 3G.
This signal will be used for synchronization purposes.
It is strongly recommended to connect an SD/HD/3G video signal
as soon as TCC70XS will be used in a video application.
LOOP OUT BNC
Female
Video output, active and reclocked loop-through of the video input.
VIDEO
OUT
BNC
Female
Video output, format of the video signals same as video input.
TCC70XS is able to add data to the input signal as well as to
delete data from the video input signal.
SERIAL
(depending
on configu-
ration)
DSUB9F
Female
1:
T
–
_TxD serial interface, see below
2:
T+_CTS serial interface, see below
6:
R
–
_RTS serial interface, see below
7:
R+_RXD serial interface, see below
4, 9:
GPO_5 Relay contact (normally open). Programmable
function.
5:
GND
Signal Ground
Serial interfaces RS485/RS422/RS232, depending on configuration
RS485:
Signals T
–
/T+ = balanced inputs/outputs
RS422:
Signals T
–
/T+ = balanced outputs
Signals R
–
/R+ = balanced inputs
RS232:
TxD = transmit line, unbalanced data output
CTS = Clear To Send, handshake input
RTS = Request To Send, handshake output
RxD = receive line, unbalanced data input
