Installation & Operation Manual TCC70XS
Page 117
Configuration page
D-VITC Generate
:
Line Select
, SMPTE 12M recommendations:
D-VITC in SD 625/50: line 19 (and opt. 21).
D-VITC in SD 525/60: line 14 (and opt. 16).
1st Line = 2nd Line: D-VITC in one line only.
Blanking
: Selected lines can be blanked.
Typical application is to remove a D-VITC
from the video signal. Lines which are
selected for blanking and for D-VITC will be
blanked before the D-VITC will be generated.
Configuration page
Video
:
Insert Enable
: Check only if you want to
visibly insert any video window into the video
signal.
Configuration page
Keys
(recommended):
Status
Gen Sync Status
: feedback of the
phase and frequency synchronization.
Status segment lights up during video lock.
Status segment flashes slowly during the fine
trim procedure.
Status segment flashes fast if video synchroni-
zation is lost.
Status
Jam
: feedback of the jam sync method:
Status segment lights up = generator receives
and accepts the read time code.
Status segment flashes = generator does not
receive valid time code.
Note: Upon shipping, the settings described above have been stored as a profile in the
module:
Profile 1: LTC
–
VTC
