Installation & Operation Manual TCC70XS
Page 17
1.3 Back Panel Connectors
1.3.1
TCC70XS (v2)
ACT
LINK
ETHERNET
LTC OUT
LTC IN
VIDEO IN
VIDEO OUT
LOOP OUT
REF / GPI
PC
SERIAL
85 - 264 V AC
47 - 440 Hz, 0.75 A
Fuse: 1 A T / 250 V
Name
Connector
Pin Assignment/Description
Mains inlet
IEC
locking
inlet
Mains inlet module, consists of:
•
Universal IEC locking inlet according to IEC/EN 60320
–
1/C14, protection class 1.
•
2
–
pole extra safe fuse
–
holder.
•
2
–
pole ON/OFF switch.
ETHERNET
RJ45
female jack
Ethernet port. You can control the complete
functionality of TCC70XS through this port.
Also, you can open a status monitor and
upload and download profiles.
Orange
–
coloured LED (LINK) lights up if connection to the
Ethernet network has been established.
Green LED (ACT) flashes during Ethernet activity.
PC
USB
Receptacle
Type B
USB port, used with the following PC programs:
Set
–
Up and Software Updates
Status Monitor
Minimal requirement for your PC: USB 1.1.
Use a common “Type A to Type B” cable.
REF/GPI
RJ45
Female jack
1: GPIO_1
Configurable: programmable I/O function or
input PPS signal of an external reference
2: GPIO_2
Configurable: programmable I/O function or
input time & date of an external reference
3: GPIO_3
Configurable: programmable I/O function
6: GPIO_4
Configurable: programmable I/O function
4: GND
Signal ground
5: 24 V
24 VDC output, 200 mA reversible fused
7: GND
Signal ground
8: n.c.
(do not connect)
ACT
LINK
