Installation & Operation Manual TCC70XS
Page 35
Update of Ethernet Functions
The computer which you have to use for the update must be connected to the same network as
TCC70XS. If using a firewall, ensure that the computer can connect to TCC70XS on TCP ports
20, 21, 23 and 954 and on UDP ports 123, 161 and 8001 for both incoming and outgoing
traffic.
1. Be sure that TCC70XS and the computer are connected to the same network, and that
they can reach each other at the ports listed above. Switch on TCC70XS.
2. Execute
on your computer.
3. Open the
Tools
menu and choose “
Ethernet Module Configuration...
“. The wi
ndow
“
Ethernet Module Configuration
“ appears:
4. Click "
Scan Network
" to search for TCC70XS Ethernet modules in the network. All units
found will be shown in a list. Choose your unit from this list.
5.
At “
Flash File
“ click the “browse” button ("
...") to search for the update file:
TCC70 Ethernet n.nn.nn.tcf
.
6. Check the
‘
Restore Factory Settings
’ checkbox
only if it is necessary to restore the factory
settings. This will reset IP parameters and passwords as well!
Click
“
Start Update
“.
7. During flash update, the Ethernet operation of the unit stops! The unit reboots after flash
update. A “Reboot complete” message appears. Press the “
OK”
button.
8.
An “Update complete” message appears. Press the “
OK”
button. Update is finished now.
