Installation & Operation Manual TCC70XS
Page 20
Name
Connector
Pin Assignment/Description
LTC IN
XLR3F
IEC 268
–
1
Female
2
1
3
LTC input, balanced
1: GND
2: LTC_IN_A
3: LTC_IN_B
Connections: balanced signals
unbalanced signals
from XLR3M
1
2
3
LTC_IN_A
LTC_IN_B
GND
from Cinch/RCA/BNC
LTC_IN_A
LTC_IN_B
GND
LTC OUT
XLR3M
IEC 268
–
1
Male
1
2
3
LTC output, balanced
1: GND
2: LTC_OUT_A
3: LTC_OUT_B
Connections: balanced use
unbalanced use
to XLR3F
2
1
3
GND
LTC_OUT_B
LTC_OUT_A
to Cinch/RCA/BNC
LTC_OUT_A
GND
LTC_OUT_B
VIDEO IN
BNC
Female
Serial digital video input: SD, HD, 3G.
This signal will be used for synchronization purposes.
It is strongly recommended to connect an SD/HD/3G video signal
as soon as TCC70XS will be used in a video application.
LOOP OUT BNC
Female
Video output, active and reclocked loop
–
through of the video
input.
VIDEO
OUT
BNC
Female
Video output, format of the video signals same as video input.
TCC70XS is able to add data to the input signal as well as to
delete data from the video input signal.
10/100
BASE
–
T
RJ45
female jack
Ethernet port. You can control the complete
functionality of TCC70XS through this port.
Also, you can open a status monitor and
upload and download profiles.
Orange
–
coloured LED (LINK) lights up if connection to the
Ethernet network has been established.
Green LED (ACT) flashes during Ethernet activity.
Mains inlet
IEC
locking
inlet
Mains inlet module, consists of:
•
Universal IEC locking inlet according to IEC/EN 60320
–
1/C14, protection class 1.
•
2
–
pole extra safe fuse
–
holder.
•
2
–
pole ON/OFF switch.
ACT
LINK
