Pioneer SGX-CA600 User Manual Download

Page: 223 / 335

223

The total power value for the left and right sensors, left and right bal-

ance, torque effect, pedal smoothness, cadence value, and other val

ues are transmitted.

Single power meter mode

Use this mode when connecting as the single model of the ANT+ power

meter.

The power value of the left or right sensor is doubled and then

transmitted.

The torque effect, pedal smoothness, cadence value, and other values

are also transmitted.

Press the [Menu] button.

Use the [←]/[→] buttons to select [Bike] and then press the

[Confirm] button.

Summary of Contents for SGX-CA600
















































































































































































































































































































































Search results

Summary of Contents for SGX-CA600

Reviews:

Related manuals for SGX-CA600

Brands by name

Popular brands

Pioneer SGX-CA600, User Manual

Search results

Summary of Contents for SGX-CA600

Reviews:

Related manuals for SGX-CA600

Brands by name

Popular brands