Pioneer SGX-CA600 User Manual Download

Page: 277 / 335

277

Setting item

Description

Brightness

Adjust the brightness for when the backlight is on to any

of 11 levels (3*).

You can set the screen brightness also in the status

display by pressing and holding the [Confirm] button for 2

seconds or more from the meter screen.

Back Light Timer

Switch the backlight lighting duration to [Always On]*, [15

sec], [30 sec] or [1 min].

When other than [Always On] is selected, the backlight

turns off after the selected time elapses after the last

operation is performed on the device.

*: Factory default setting

Speaker Settings

Configure the settings related to sound.

The settings are saved linked to the selected bike.

Press the [Menu] button.

Summary of Contents for SGX-CA600
















































































































































































































































































































































Search results

Summary of Contents for SGX-CA600

Reviews:

Related manuals for SGX-CA600

Brands by name

Popular brands

Pioneer SGX-CA600, User Manual

Search results

Summary of Contents for SGX-CA600

Reviews:

Related manuals for SGX-CA600

Brands by name

Popular brands