Pioneer SGX-CA600 User Manual Download

Page: 167 / 335

167

Note

In [Bluetooth Setting], enable the channel to be used.

Bluetooth Setting

If there is no available channel, refer to the following and then delete a

registered partner or coach.

Use the [←]/[→] buttons to select [Add Coach] and then

press the [Confirm] button.

A search for cyclocomputers that can be connected in the surrounding

area starts.

Search may take more than 1 minute.

When the partner addition approval request is sent by a coach, one

candidate is displayed automatically and the "Add to coach?" message

appears.

Summary of Contents for SGX-CA600
















































































































































































































































































































































Search results

Summary of Contents for SGX-CA600

Reviews:

Related manuals for SGX-CA600

Brands by name

Popular brands

Pioneer SGX-CA600, User Manual

Search results

Summary of Contents for SGX-CA600

Reviews:

Related manuals for SGX-CA600

Brands by name

Popular brands