Pioneer SGX-CA600 User Manual Download Page 73

Page: 73 / 335

Uploading

There are three ways to upload log data.

Data selection (upload manually)

Differential upload (uploaded all log data that is different from the

already uploaded log data)

Auto upload (uploaded automatically)

After setting up Wi-Fi, perform either "

Uploading the log data manually

" or

Uploading the log data automatically

Wi-Fi Settings

Uploading the log data manually

Select the log data to upload to Cyclo-Sphere from the list of log data and

then upload the log data.

Press the [Menu] button.

Use the [←]/[→] buttons to select [Settings] and then press

the [Confirm] button.

Summary of Contents for SGX-CA600
















































































































































































































































































































































Search results

Summary of Contents for SGX-CA600

Reviews:

Related manuals for SGX-CA600

Brands by name

Popular brands

Pioneer SGX-CA600, User Manual

Search results

Summary of Contents for SGX-CA600

Reviews:

Related manuals for SGX-CA600

Brands by name

Popular brands