Pioneer SGX-CA600, User Manual

Page: 292 / 335

292
The value becomes higher in accordance with the duration, and becomes 100% when the MMP is
updated.
・ To use this function, you need a Pioneer pedaling monitor sensor or ANT+ power meter. Set
each time of [Settings] > [User Settings] > [MMP].
・
You can download the MMP parameters for three months in the past from the accumulated log
data by synchronizing with Cyclo-Sphere in [Settings] > [Cyclo-Sphere].
・ The intensity of 60 minutes indicates the ratio to the FTP value. Therefore, even if you do not
have the best data for 60 minutes for the last three months, the training intensity can be displayed
properly. Set this from [Settings] > [User Settings] > [FTP.
Power Power ・ Watt
・ %FTP
・ %CP
・ LEVEL
・ W/ kg or
W/ lb (*)
Power ― Current output. This indicates the
power value of the ANT+power meter
or ANT+smart trainer. If an ANT+power
meter or smart trainer is not connected
when a pedaling monitor sensor is con-
nected, this indicates the power value of
the pedaling monitor sensor.
Power Avg Av Average Output
Power Lap
Avg LapAv Output per lap
Power n sec
Avg ・ 3 s. Avg
・ 5 s. Avg
・ 10 s. Avg
・ 30 s. Avg
・ 60 s. Avg
Ns Average output for fixed period
Power Max ・ Watt
・ %FTP
・ %CP
・ LEVEL
・ W/ kg or
W/ lb (*)
Mx Maximum output
Power Lap
Max LapMx Maximum output per lap
Power Last
Lap Avg LstAv Last lap average output
Power Last
Lap Max LstMx Last lap maximum output
Total Work
Amount kJ Work ― Total work amount
Total Work
Amount Lap Lap Total work amount per lap
Power Bal-
ance Power
Balance % Bal/ Bal L:R ― Left/ right ratio of current power. This
indicates the left/ right ratio of the ANT+
power meter or smart trainer. If an ANT+
power meter or smart trainer is not
connected or balance display is not sup-
ported when a pedaling monitor sensor
is connected, this indicates the left/
right
ratio of the pedaling monitor sensor.
Power Bal
Avg Av Average left/ right ratio