Pioneer SGX-CA600 User Manual Download

Page: 251 / 335

251

Tangential force: Check that the force is within the range of 0 ±3 N.

Radial force: Check that within the range of 0 ±3 N.

Battery: Check the battery level and status.

New: New battery

Good: Good state

OK: Normal

Low: Low

Critical: Cannot be used

Note

If a value is outside of the range, zero point calibration may have been

performed when the crank is in an unstable state such as when it was

moving.

Perform zero point calibration again when the crank is still.

If the battery status is low or critical, replace the batteries of the both the

left and right sensors at the same time.

Summary of Contents for SGX-CA600
















































































































































































































































































































































Search results

Summary of Contents for SGX-CA600

Reviews:

Related manuals for SGX-CA600

Brands by name

Popular brands

Pioneer SGX-CA600, User Manual

Search results

Summary of Contents for SGX-CA600

Reviews:

Related manuals for SGX-CA600

Brands by name

Popular brands