Pioneer SGX-CA600 User Manual Download Page 162

Page: 162 / 335

162

Note

In [Bluetooth Setting], enable the channel to be used.

Bluetooth Setting

If there is no available channel, refer to the following and then delete a

registered partner or coach.

■

Deleting a Partner or Coach

Use the [←]/[→] buttons to select [Add Partner] and then

press the [Confirm] button.

The "Add Partner, Searching" message appears and a search for part

ners that can be connected in the surrounding area starts.

A list of device numbers are displayed as connection candidates for the

found partners.

Search may take more than 1 minute.

Note

The procedure of "Add Coach" needs to be performed on the partner's

cyclocomputer.

For details, refer to the following.

■

Adding a Coach

Summary of Contents for SGX-CA600
















































































































































































































































































































































Search results

Summary of Contents for SGX-CA600

Reviews:

Related manuals for SGX-CA600

Brands by name

Popular brands

Pioneer SGX-CA600, User Manual

Search results

Summary of Contents for SGX-CA600

Reviews:

Related manuals for SGX-CA600

Brands by name

Popular brands