Phytec phyCORE-LPC2292/94, Hardware Manual

Page: 82 / 144

phyCORE-LPC2292/94
70
©
PHYTEC Meßtechnik GmbH 2006 L-658e_5
RN800
R800
Figure 13: debugCORE-LPC2292/94 (Bottom View)
A DIP switch has been added to the configuration resistors already
present on the phyCORE module to enable easier configuration of the
controller's debug interface. When using the DIP switch for
configuration, resistors R205 and R206 must be removed.
DIP switch S800 on the debugCORE-LPC2292/94 has the following
configuration options:
DIP Switch Open/OFF Closed/ON
#1 Normal operation of the
LPC2292/94
Boot mode always enabled
#2 Port pins P116-P125
function as standard I/O
port
Port pins P116-P125
function as Trace port
#3 Port pins P126-P131
function as standard I/O
port
Port pins P126-P131
function as debug interface
#4 reserved reseverd
Table 42: debugCORE-LPC2292/94 DIP Switch S800