Phytec phyCORE-LPC2292/94, Hardware Manual

Page: 78 / 144

phyCORE-LPC2292/94
66
©
PHYTEC Messtechnik GmbH 2006 L-658e_5
1
19
X701
Figure 11: JTAG Interface (Bottom View)
Pin 1 of the JTAG concector X701 is marked by a black pad on the
connector side of the PCB.
The JTAG interface of the phyCORE-LPC2292/94 can operate in
various modes. On-board configuration resistors select if the
corresponding port pins function as JTAG interface or as standard I/O
port.
In addition to the standard JTAG port the phyCORE-LPC2292/94 also
features a TRACE port which is also configured via on-board
resistors.
Refer to section 13 for details .