Phytec phyCORE-LPC2292/94, Hardware Manual

Page: 35 / 144

Jumpers
©
PHYTEC Messtechnik GmbH 2006 L-658e_5
23
Default Setting Alternative Setting
J610
closed RTC (U604) SCL signal
connected to port P02 of the
µC. P02 is then no longer
available as standard I/O pin
at X700A47. open RTC SCL signal not connected
to the µC on the module,
external connection required (at
pin X700C31). P02 is available
as standard I/O pin at X700A47.
J611 closed EEPROM (U607) /PCS0
signal connected to port P10
of the µC. P10 is then no
longer available as standard
I/O pin at X700B50. open EEPROM /PCS0 signal not
connected to the µC on the
module, external connection
required (at pin X700C26). P10
is available as standard I/O pin at
X700C13.
J612 closed EEPROM (U607) MISO0
signal connected to port P05
of the µC. P05 is then no
longer available as standard
I/O pin at X700A49. open EEPROM MISO0 signal not
connected to the µC on the
module, external connection
required (at pin X700D27). P05
is available as standard I/O pin at
X700A49.
J613 closed EEPROM (U607) MOSI0
signal connected to port P06
of the µC. P06 is then no
longer available as standard
I/O pin at X700A50. open EEPROM MOSI0 signal not
connected to the µC on the
module, external connection
required (at pin X700C28). P06
is available as standard I/O pin at
X700A50.
J614
closed EEPROM (U607) SCLK0
signal connected to port P04
of the µC. P04 is then no
longer available as standard
I/O pin at X700B48. open EEPROM SCLK0 signal not
connected to the µC on the
module, external connection
required (at pin X700D28). P04
is available as standard I/O pin at
X700B48.
J615
1 + 2 Supply voltage for CAN
transceivers U605 and U606
(TLE6250V33) from VCC2
(5 V). 2 + 3 Supply voltage for CAN
transceivers U605 and U606
connected to VDD_V3V3
(3.3 V).
J616 closed Pin 5 on CAN transceivers
U605 connected to 3.3 V
supply voltage (use only
with TLE6250V33 devices). open Pin 5 on CAN transceivers U605
not connected to 3.3 V supply
voltage (use only with other
CAN transceivers devices).
J617 closed Pin 5 on CAN transceivers
U606 connected to 3.3 V
supply voltage (use only
with TLE6250V33 devices) open Pin 5 on CAN transceivers U606
not connected to 3.3 V supply
voltage (use only with other
CAN transceivers).
J618
open VDD_V3V3 supply voltage
is switched via FET Q600A. closed VDD_V3V3 supply voltage
directly derived from VCC.