Phytec phyCORE-LPC2292/94, Hardware Manual

Page: 54 / 144

phyCORE-LPC2292/94
42
©
PHYTEC Messtechnik GmbH 2006 L-658e_5
3.20 J616, J617 CAN Transceiver VCC, Pin 5
These jumpers are used to connect the 3.3 V main supply voltage to
pin #5 on the TLE6250V33 CAN transceivers at U605 (J616) and
U606 (J617). If other CAN transceiver devices are used on the
phyCORE-LPC2292/94 these jumpers must remain open.
The following configurations are possible:
CAN Transceiver VCC, Pin 5 J616 J617
Pin 5 on CAN transceivers U605 connected
to 3.3 V supply voltage (use only with
TLE6250V33 devices).
closed* -
Pin 5 on CAN transceivers U605 not
connected to 3.3 V supply voltage (use only
with other CAN transceivers devices).
open -
Pin 5 on CAN transceivers U606 connected
to 3.3 V supply voltage (use only with
TLE6250V33 devices).
- closed*
Pin 5 on CAN transceivers U606 not
connected to 3.3 V supply voltage (use only
with other CAN transceivers devices).
- open
* = Default setting
Table 29: J616, J617 CAN Transceiver VCC at Pin #5