PerkinElmer 200A Series, User Manual

Page: 70 / 172

70.
Series 200a Fi User’s Guide
The sequence of wavelength drive (check of reference point for drive), lighting of the lamp and auto
zeroing is performed.
3.
When the above steps are successfully completed, the 1st monitor screen is presented.
U
,
V
: Accesses the 2nd monitor screen.
U
,
V
, ESC (escape): Returns to the 1st monitor screen.
*An error message will be presented if an abnormality occurs during initializing.
The 1st monitor screen (FL indication)
TIME Ex Em FL PROG LAMP [I]
0.0 250 350 0.0 1 Xe
The 2nd monitor screen (energy indication)
Ex Em MONITOR (Ex) (Em) LAMP [I]
250 350 ****** ****** Xe
a. The indicated values are the default values or currently set values.
b. The indicated program number is the currently selected one.
However, when the time program is not used, “-”is indicated.
c. In lamp indication, Xe stands for the lit status of the xenon lamp and OFF stands for the
extinguished status.
d. Fluorescence intensity (FL) is indicated within a range from -1000.0 to 1000.0. If the
intensity is outside this range, “******” is indicated.
e. Status indicators should be read as follows.
[I] : Initial
status.
[R] : Time program running status
[B] : Busy status
[L] : Key-locked status
4. Turn OFF the power switch of the detector.
Advance to Setup or Selecting the Communication Channel (CH).
Elapsed
time
Excitation
wavelength Emission
wavelength
Fluorescence
intensity
Program
number Lamp
indicator
Status
indicator
U
key or
V
key
U key, V key or
ESC
key
Excitation
wavelength
Emission
wavelength
Excitation WL
energy
Emission WL
energy
Lamp
indicator
Status
indicator