PerkinElmer 200A Series User Manual Download Page 160

Page: 160 / 172

160 Series 200a Fl User’s Guide

Error Messages

Message Description

Remedy

ROM ERROR

PRESS “CL” KEY TO CLEAR
MESSAGE.

ROM is faulty.

1) Press CL key, and 1st

monitor screen returns.
2) Contact our nearest

service center.

RAM ERROR PRESS “CL” KEY

TO CLEAR MESSAGE.

RAM is faulty.

1) Press CL key, and 1st

monitor screen returns.
2) Contact our nearest

service center.

PARAMETER ERROR

PARAMETERS ARE SET TO
DEFAULT VALUE.

Analytical parameters are

inadequate.

1) Press CL key, and 1st

monitor screen returns.
2) Turn on power again.

3) Contact our nearest

service center.

LOG INFORMATION ERROR
LOG INFORMATION IS

INITIALIZED.

Log information is
inadequate.

1) Press CL key, and 1st
monitor screen returns.

2) Turn on power again.

3) Contact our nearest

service center.

EPROM ERROR INSTRUMENT

INFO. IS INITIALIZED.

Instrument parameters are

inadequate.

1) Press CL key, and 1st

monitor screen returns.

2) Turn on power again.

3) Contact our nearest

service center.

Ex (Em) SIDE OF WL DRIVE

MECHANISM ERROR

Failure in detecting Ex or Em

wavelength origin during

self-diagnosis test

(initialization).

1) Cannot be released by key

operation.

2) Turn on power again.

3) Contact our nearest
service center.

Ex (Em) SIDE ACCURACY

(254 nm) NOT DETECTED

Wavelength error exceeds

(10 nm during wavelength

accuracy check.

Contact our nearest service

center.

LAMP OFF BY OVERHEAT!

PRESS “CL” KEY TO CLEAR

MESSAGE.

Abnormal temperature

detected.

1) Press CL key, and 1st

monitor screen returns.

2) Contact our nearest

service center.

Xe lamp turned off to

prevent its overheating.

1) Press CL key, and 1st

monitor screen returns.

2) Use UTLTY key to light up

the lamp again.

LAMP OFF BY EXTERNAL

INPUT PRESS “CL” KEY TO

TURN ON.

Lamp has been turned off

due to an external contact

input. Busy status is

assumed.

1) Release the key lock if it

has been activated.

2) Press CL key and light up

the lamp again.

LAMP OFF BY EXTERNAL

ERROR PRESS “CL” KEY TO

TURN ON.

Lamp has been turned off

due to an external error.

Busy status is assumed.

1) Release the key lock if it

has been activated.

2) Press CL key and light up

the lamp again.

LAMP OFF BY LEAKAGE

PRESS “CL” KEY TO CLEAR

MESSAGE.

Liquid leakage has occurred.

Xe and Hg lamps have been

turned off. Busy status is

assumed.

1) Press CL key, and 1st

monitor screen returns.

2) Use UTLTY key to light up

the lamp again.

Summary of Contents for 200A Series













































































































































































Search results

Summary of Contents for 200A Series

Reviews:

Related manuals for 200A Series

Brands by name

Popular brands

PerkinElmer 200A Series, User Manual

Search results

Summary of Contents for 200A Series

Reviews:

Related manuals for 200A Series

Brands by name

Popular brands