PerkinElmer 200A Series, User Manual

Page: 86 / 172

86.
Series 200a Fi User’s Guide
Press numeric key 2 and then ENT key.
Next, advance to the Xe lamp change date setting screen for setting the date of xenon
lamp change.
e. Set the date of xenon lamp change in the following procedure.
i. Input a month for MM (cursor appears under MM).
<Xe lamp change date setting screen (month)>
Xe LAMP CHANGE (MM DD YYYY)
<1-12>
_7 25 2005
Press numeric key (1 to 1 2) and then ENT key.
The cursor moves to DD.
ii. Input a day for DD.
<Xe lamp change date setting screen (day)>
Xe LAMP CHANGE (MM DD YYYY)
<1-31>
7 25 2005
Press numeric key (1 to 3 1) and then ENT key.
The cursor moves to YYYY.
iii. Input a year for YYYY.
<Xe lamp change date setting screen (year)>
Xe LAMP CHANGE (MM DD YYYY)
<2000 ~ 2100>
7 25 2005
Press numeric keys (2 0 0 0 to 2 1 0 0) and then ENT key.
™
Even when the same year as desired is indicated, it must be reentered again.
f. Logbook setting is now completed and the 1st monitor screen returns.
™
When a xenon lamp change date is set, the total ON period of the Xe lamp and the
number of switching-on times will be automatically reset accordingly.
3. Display of Hg lamp LOGBOOK data
Total ON period of the Hg lamp, the number of switching-on times and the date of the last lamp change
can be indicated.
a. Press the GLP key.
b. The following display will be presented.
<GLP initial screen>
GLP (LOGBOOK=1, KEY LOCK=2,
1
WL CHECK=3, Xe CHECK=4)
Select LOGBOOK.