PerkinElmer 200A Series, User Manual

Page: 94 / 172

94.
Series 200a Fi User’s Guide
SPECTRUM MODE (FL (Ex)=1, FL (Em)=2)
2
Press numeric key 2 and then ENT to select FL (Em).
Now proceed to the scan range setting screen for setting a scan range, and enter a start
wavelength (cursor will appear at WL1).
c. Enter a start wavelength (minimum value) at WL1 of the scan range.
<Scan range setting screen (indicate WL1)>
SCANNING WL RANG (WL1 WL2) nm FL (Em)
<250-850> 250 - 700
Press numeric keys 2 5 0 to 8 5 0 and then ENT.
™
Setting range : 250 to 850 nm
™
Initial (default) value : 250
™
If setting will not be changed, press
V
key to proceed to WL2 setting.
The cursor now moves to WL2.
d. Now enter an end wavelength (maximum value) at WL2.
<Scan range setting screen (indicate WL2)>
SCANNING WL RANG (WL1 WL2) nm FL (Em)
<300-900>
250 - 700
Press numeric keys 3 0 0 to 9 0 0 and then ENT.
™
Input value : Value of less than 900 within WL1 + 50 to WL1 + 400.
™
Setting range : 300 to 900 nm
™
Initial (default) value : 700
™
Pressing
U
key prior to ENT key will return to WL1.
e. A memorize spectrum setting screen will now appear.
<Memorize spectrum setting screen>
MEMORIZE SPECTRUM NO. (1 ~ 4)
1
Set a memorize spectrum No. for the spectral data.
Press a numeric key 1 to 4 and then ENT.