PerkinElmer 200A Series, User Manual

Page: 71 / 172

Operation
71
General Information about Entering Parameters
1. Entering a value, press numeric key then ENT (enter) key.
2. Erasing the present data entry
a. Made an error in entering data, but have NOT pressed ENT key, press CL (clear) key,
then re-edit the value.
b. Made an error in entering data and HAVE pressed ENT key, press ESC (escape) key for
return to the 1st monitor screen then re-edit the value.
3. Canceling the setup conditions, press ESC key for return to the 1st monitor screen followed by re-
setup.
4. Accessing the next window, without change or entering values, press ENT key, or
V
key.
Accessing the previous or next window, press
U
key, or
V
key.
5. If the time program is not in use, spectral output can be performed at any time.
If spectral output is started during data acquisition, the data is automatically directed to the integrator
output.